+34 941 30 60 70

System 76

White

The tube of 76m/m has been designed to support long and heavy blinds.

One of the greatest problems for manufacture blinds is the limitation in width. Due to the flexibility of the tubes, they sag by their own weight and for the weight of the fabrics.

To overcome this obstacle, a 76 m/m reinforced and treated tube has been designed to reach widths up to 5.00 ml.

Depending on the fabrics we probably have to adjust in width, to that end, we provide a table with the results of our test with the fabrics that we have available.

In all the cases and for any system, the end cap of the tube always consists of the same elements:

1.- Bracket
2.- End cap for 58m/m tube
3.- Adapter for 76m/m tube

The 76 m/m tube can be used with all the systems of 58m7m, for that we only need the adaptors 76-08.

Photo	Reference	Description	Units Box
	76-03	Aluminium tube 76m/m 5 lm	40 lm
	76-08	Adapter for 76 m/m tube	50
	76-05	Spring for tube 76	50
	76-MTC	Kit 76 Motor 45 Cherubini. Colour 01, 03, 33, 42, 72	50

Aluminium tube 76m/m 5 lm

Adapter for 76 m/m tube

Spring for tube 76

Kit 76 Motor 45 Cherubini. Colour 01, 03, 33, 42, 72

Geared down drive system

In the case of geared down drive system and due the dimensions we can manufacture, we suggest to use the 76mm spring assistant.

The necessary components for this system are:

Photo	Reference	Description	Units Box
	58S-03	Set of brackets of 58m/m	50
	58S-08	Adapters for 58 m/m tube	50
	76-08	Adapters for 76 m/m tube	50
	43-58	Geared down drive system	50

Set of brackets of 58m/m

Adapters for 58 m/m tube

Adapters for 76 m/m tube

Geared down drive system

Before installing the spring assistant in the geared down drive system, we have to introduce the adapters, first the adapter for 58 m/m tube and then the adapter for 76 m/m tube.

Finished this operation, we can install the spring assistant to the geared down drive system for later screwing the adapter to the 76m/m tube.

Motorized system

Before installing the driving wheel on the motor, we have to introduce in the motor one of the 76 m/m adapters, after that we can install the drive wheel.

Finished this operation, we can introduce the motor into the 76 m/m tube and screw the adapter to the tube.

To motorize the 76mm tube we have to use the kit motor.

In the case of Cherubini motors the necessary components are: